Y9512 Hypoid Tester
Y9512 Hypoid Tester
Ⅰ. MACHINE APPLICATIONS
This machine is designed to test the position of tooth bearing, the noise level, the backlash, the mounting distance, etc. of straight bevel gears, spiral bevel gears and hypoid gears of diameters under 125mm.
The results measured of the positions of the tooth bearings may be used as the coordinate data for setting up the bevel gear cutting machines. When the pinion head and the gear head are at the 180°, the machine may be used to check the tooth bearings and the noise level of spur gear pairs of center distance under 35mm.
Ⅱ. SPECIFICATIONS
Max. diameter of bevel gear | I=10:1, 90° shaft angle | 125mm |
I=10:1, any shaft angle | 80mm | |
Max. center distance of spur gears | 35mm | |
Shaft angle, when the longitudinal scale of the gear is 11mm Note: the sliding base is at 130mm | Min. 45° | |
Max. 180° | ||
Spindle center to endface of gear spindle at 90° shaft angle | Min. 0mm | |
Max. 100mm | ||
Gear spindle center to endface of pinion spindle at 90° shaft angle | Min. 25mm | |
Max. 140mm | ||
Endface of pinion spindle to endface of gear spindle at 180° shaft angle | Min. 25mm | |
Max. 240mm | ||
Max. speed of pinion spindle | 1000, 1500, 2500rpm | |
Main motor | 1.1KW 910rpm | |
Overall dimensions (L×W×H) | 1050×750×1350mm | |
Weight | 1000kg | |
Note: When the scale readings are zero, the sliding base should be at the place of 65mm. | ||